Water damaged subfloors header
Dry or replace subfloors header

Water Damaged Subfloor - Dryout Tips

411 water damaged subfloor puroclean

11315 Sunrise Gold Circle
Rancho Cordova, CA 95742

866-722-7876 (Toll Free)
916-354-9743 (Business)

Fax: 916-647-0999



Drying water damaged subfloor

Water damaged concrete subfloor image

There are many factors and materials to take into consideration when dealing water damage to a structure. One of those factors that determine the best course of action after experiencing water damage is the sub floor. Sub floors, based on their material make up, vary greatly in how they respond to water and in turn how the react to being dried out. A general rule of thumb is that the faster the sub floor material absorbs water the more damage it sustains during a flood - particle board will become irreparably damaged much quicker than plywood. Drying is done through evaporation and can be drastically accelerated when proper drying principals and equipment are used. The type and composition of sub floor material will play a large part in whether drying is appropriate or not.

Water damaged concrete slab sub floor

Water damaged concrete slabs vary greatly in their porosity due the materials used, any finishes applied or sealants added once cured. A concrete slab can be quite something to dry and pose all sorts of problems for restoration companies in certain situations. Stress cracks in the concrete slab can also pose problems on their own because water seeps under the slab and can be very difficult to dry. Some areas of the Country have very high water tables and can pose another issue to restorers who are trying to dry the concrete slab back to a dry standard or reasonable moisture content. The wet concrete slab may have absolutely nothing to do with the original water loss, but because of underground water can really create some headaches especially if it was incorrectly constructed in the first place.

In most cases when concrete gets wet following a water damage loss and a restoration company can respond with the first 72 hours following the loss the concrete slab can be returned back to it's correct (original) moisture content. As long as the restoration company performs extraction and then creates a stable drying system using dehumidification promoting optimal evaporation then the concrete slab will dry quick enough to prevent any further issues. Furthermore, concrete slabs don't typically support mold growth because they tend to not contain any organic materials, they're alkaline in nature and tend to remain cool when wet.

Sometimes restoration companies will happen upon a concrete floor (or stone tile) laid over a wood based sub floor. This can pose further problems as the concrete and wood both need to dried. Typically this is found when there are crawl spaces so the wood sub floor can also be dried from below, within the water damaged crawlspace as well as above through the concrete floor. There are a few methods used to accelerate the drying of these materials and two are as follows:

1 - LGR dehumidifiers or desiccants: When these dehumidifiers are coupled with adequate air movement, the humidity levels in the room can drop dramatically and promote fast evaporation from the concrete substrate. Sometimes it's recommended to tent the floor and duct the dehumidified air into the tenting (over 1-2 vertical feet) so as to reduce the humidity in the tent as opposed to the whole room (which could be anywhere from 8 - 20 feet in height alone). This process of tenting can drastically reduce the drying time. Keep in mind if the concrete slab is laid over wood flooring it's a good idea to also dehumidify the air in the crawlspace too.

2 - Drying with hot air: Hot air is another way to dry this type of sub floor makeup. Since hot air tends to have a low relative humidity (regardless of actual humidity) it encourages evaporation by "exciting" the water molecules absorbed into the sub floor and increases the rate of evaporation. The air increases in relative humidity as it absorbs the released water molecules and is exhausted to the outside or dehumidified before it cools again.

Water damaged OSB subfloor (oriented strand board)

OSB falls somewhere between plywood and particle board in the damage water can cause and how it responds to effective drying methods. OSB can be damaged very easily by prolonged water exposure and can loose it's strength quite quickly, however if the water damage is caught quickly OSB can be saved because it doesn’t swell and become distorted as quickly as particle board. OSB also dried quicker than plywood because of it's makeup. Badly water damaged OSB should be replaced.

water damaged wood subfloor image

Water damaged particle board subfloor

Replacing wet particle board could be more cost effective rather than attempting to dry it, however it can be done if caught quickly enough and it hasn't swollen yet. Particle baseboards tend to swell and distort rather quickly due to their resin composition and removing them to expose the walls and replacing them with new ones later is a much better approach when trying to return the home to a pre-loss condition. Restoration companies should inspect particle board very closely and make the determination whether to try and save them or simply replace them.

Water damaged plywood subfloor

If plywood sub floors have been wet for less than 72 hours they can be saved with water extraction and the correct drying procedures (dehumidification and air movement). If plywood has been exposed to water for longer than 72 hours it needs to be a judgment call on whether they can be saved or not. Plywood varies based on the glues used to bond the layers together and some plywood is a lot more porous than other which increases water absorption and hence damage, but on the other hand can also dry quicker too. Once the plywood sub floor is dry it should be inspected for further damage before laying the finished flooring down over it.

Regardless of the type of subfloor - if water damage occurs to your home's subfloor, call your PuroClean Home Rescue (866-722-7876), the "Paramedics of Property Damage." All PuroClean offices have professional, well-trained and certified Technicians who provide the latest state-of-the-science services to all property damaged from water, fire/smoke, mold, and other disasters.


Copyright © 2009-2013. All rights reserved in all countries.
Reproduction of the material is prohibited without prior permission.

back image

© 2009 - 2013 PuroClean Home Rescue. All rights reserved